Postes de table Icom

Les transceivers Icom Mobiles et portables (HF,VHF) sont là.
Les radios Icom portatives sont là.

Ici vous trouverez:

• IC-7800
• IC-7700
• IC-7600
• IC-9100 Nouveau
• IC-7200
• IC-718

IC-7800

Icom développe des équipements de radio communication depuis plus de quarante ans . Notre histoire a été challenge technique et excellence depuis le premier circuit PLL analogique dans le IC-200, jusqu'à l'inauguration du DSP 32-bit à virgule flottante du IC-756PRO. Icom a toujours donné forme aux idées avec cette accumulation technique. Des stations radio amateur récentes utilisent intensivement de grandes puissance et des antennes à grands gains qui augmentent la force des champs de signaux non recherchés, et de ce fait nécessitent une plus grande dynamique de réception. Icom a conçu le nouveau modèle amiral IC-7800 qui est la fusion de quarante ans d'études des circuits HF analogiques, avec la technologie digitale tranchante.

Le résultat donne une dynamique de 110dB , +40dB de point d'interception du 3eme ordre dans les bandes HF et d'autres caractéristiques phénoménales en matière de performances. Les récepteurs combinent des technologies habituelles et nouvelles, pour obtenir +40dBm IP3, une caractéristique jamais encore obtenue en amateur radio. Plus simplement exposé, le IC-7800 est la radio ultime pour amateur. Aucun ne s'en rapproche!

IC-7700

Icom IC-7700

Dreams become true! If the IC-7800 was too large (for your desk or our wallet) - the best radio technology has moved within your range. The new Icom IC-7700 offers the best receiver technology, based on the profound experiences by Icom engineers. Plus a clean 200W transmitter, using 48V transistor technology for best linearity, the power supply is integrated. A newly designed bandfilter with large components and relays instead of pin diodes (all to alleviate intermod distortions) works in conjunction with the new "Digi-Sel" pre selector and achieves an IP3 of +40dBm at a dynamic range of 110dB! The straightforward receiver design (double superhet) with it's three selectable roofing filters warrants an unsurpassed receiver. This makes the IC-7700 an ideal radio for the ambitious contester and DX chaser.

• IP3: +40dBm
• IP2: +110dBm
• Dynamic range: 110dB
• 3, 6 and 15 kHz Roofing filter
• Digi-Sel Pre selector
• Selectable pre-amplifiers, separate for HF and 50MHz
• IF-DSP for programmable filters
• AGC loop without pumping and pulsing noise
• Highly stable OCXO ± 0,05ppm
• 7" TFT screen, external VGA connector
• USB connectors for storage and keyboard
• RTTY and PSK31 operation without computer possible
• Four switchable antenna connectors
• Realtime spectrum scope, selectable bandwidth
• Excellent noise reduction (NR)
• Adjustable, very effective noise blanker
• S/P-DIF optical connections for AF
• Ethernet connection for firmware upgrades
• 200W transmit power
• 100 memories
• Microphone Equalizer
• Automatic Antenna tuner integrated
• Memory keyer for telegraphy
• Full QSK
• and many more...

Please note that the IC-7700 does not include a microphone in shipment.

Accessoires IC-7700

SM-20

CT-17 Front

CT-17 Rear

IC-7600

Icom IC-7600

In the tradition of the top-of-the-line transceivers IC-7800/IC-7700 Icom now offers the IC-7600. The receiver is a double superhet design with IF DSP, resulting in a much better intermod free dynamic range. Icom claims 104dB dynamic range and an IP3 of +30dBm. Equipped with two 32bit Digital Signal Processors (DSPs) the receiver has two AGC loops, one analog, one digital. This results in a perfectly controlled gain control.

Three selectable 1st IF roofing filters (15, 6 and 3kHz) provide a very good selectivity, especially at SSB and CW modes. The other IF filters are - as usual - freely programmable, due to the DSP design. THree filters can be programmed for each mode. With the well known twin passband tuning a fine tuning of the optimal bandwidth is possible during operation.

The IC-7600 offers the possibility to listen to two frequencies in one band at the same time (Dualwatch). This enables you to listen to the DX station on one VFO, and to the pile-up on the other.A must have for the serious DXer.

And the powerful signal processors offer many more functions, for example an effective noise cancellation, a variable noise blanker, automatic or manual notch filters with three selectable bandwidths, voice recorder functions for receive and transmit and much more. A precise TCXO (temperature controlled crystal oscillator) is factory installed, resulting in a very high frequency stability of ±0.5ppm. Especially digital modes like PSK31 etc benefit from this high stability.

The large colour LC display (5.8") offers a wide viewing angle and is for the first time equipped with a white LED backlight. This greatly reduces heat and has a much longer life than traditional CCFL lights. The multi function meter does not only display transmit power and signal strength, but also current and temperature of the final amplifier, SWR, ALC and compression level and much more.

A USB keyboard can be directly connected to the transceiver, allowing operation in PSK31 and RTTY without a computer. Another USB interface on the rear offers the usual remote control functions plus the receive and transmit audio. This allows for a much easier computer/transceiver integration.

Many more improvements like a selectable amplifier keying (FET or relay), freely programmable band edges, a solid 100W FET amplifier and much more turns the IC-7600 into the perfect HF transceiver for the ambitious radio amateur. And as usual with the best Icom quality!

Included in shipment are a handbook, hand microphone HM-36, carrying handle MB-121, a DC cable plus spare fuses and some hardware parts.

Accessoires IC-7600

SM-20

CT-17 Front

CT-17 Rear

IC-9100 Transceiver for Shortwave + VHF + UHF, Allmode + Satellite

Icom IC-9100

IC-9100 Transceiver for Shortwave + VHF + UHF, Allmode + Satellite

• All Bands: HF + 6m + 2m + 70cm + 23cm [1]
• All Modes: SSB + AM + FM + D-Star + Satellite [2]
• Just one Radio: IC-9100

The IC-9100 combines Icom experiences of many years in one radio. The shortwave receiver has inherited many features of the top radios: selectable roofing filters [3], doble super heterodyne receiver, IF DSP, two separate receivers and much more. Plus the well renowned tradition of Icoms V/UHF radios - now all in one radio.

Two independant receivers allow operation on two different bands, for example on shortwave + VHF or UHF, or VHF + UHF. In front of the first IF stage up to three selectable roofing filters reduce the bandwidth offered to the next stage. A 15kHz roofing filter comes installed, optionally a 6kHz or 3kHz filter can be installed. Especially the narrow filters enhance selectivity on HF and 50MHz. Each receiver has it's own DSP which supports functions like IF filtering, notch filters, AGC control,pas band tuning, noise reduction and much more.

The transmitter offers a full power of 100W on HF, 50MHz and 144MHz, 50W on 430MHz and 10W on 23cm with the optional 23cm module. An automatic antenna tuner for HF/50MHz is built in. The UT-121 D-Star option open the world of state of the art digital modulation on VHF an UHF, but also available on 28 and 50MHz. Together with the D-Star module comes the possibility to receive distance and position information from remote stations. Your own position is received by an optional GPS antenna or can be entered manually.

Also for the communication to the external world Icom uses well-proven and state of the art technology: the CI-V CAT interface, in use since more than 20 years is still available as well as a powerful USB socket. This USB socket offers not only CAT and remote control functions but also an audio interface. This turns the radio into a modem, it act's as an external soundcard to the computer. No more interface hassle required to get started with all computer-based modes! To decode RTTY you don't even need a computer at all, the IC-9100 does this internally.

Here you will find a preliminary datasheet of the IC-9100 (PDF, english).

Accessories IC-9100

The IC-9100 accepts most known accessories by Icom and other suppliers. The transceiver has a 13-pin ACC socket, just like the IC-706, IC-7000, IC-7200 and IC-718.

Here is an overview of Icom desktop speakers<7a> suitable for this radio.

IC-7200

Icom IC-7200 ^[1]

Le Icom IC-7200 est un transceiver tous modes HF/6m avec DSP FI. Cela signifie que vous n'aurez plus jamais à acheter des filtres FI. Sélectionnez seulement la bande passante désirée dans le menu. Le DSP est aussi responsable du "noise blanker" efficace, un filtre "notch" manuel (-70dB) et une réduction de bruit utile. du fait de l'intégration des fonctions DSP dans la boucle AGC les distorsions et phénomènes de blocage sont grandement réduits. Pour chaque mode on peut sélectionner trois constantes de temps d'AGC differentes.

Le transceiver est très robuste et conçu pour utilisation en extérieur. il n'est pas étanche, mais quelques gouttes de pluie ne n'affecteront pas le IC-7200. Le double ventilateur permet à l'amplificateur 100W d'émettre pendant de longues périodes sans surchauffe.

Par opposition avec beaucoup d'autres transceivers le IC-7200 a un connecteur USB. Cette connection USB n'offre pas seulement les fonctions CAT habituelles mais transporte aussi le signal audio! Donc le IC-7200 fonctionne comme un périphérique son USB externe pour votre ordinateur, facilitant ainsi l'intégration dans une station commandée à distance. Bien sur la commande traditionnelle CI-V CAT est aussi disponible.

De plus le IC-7200 offre encore plus de fonctions utiles comme 200 mémoires, atténuateur, VOX, RIT, un synthétiseur de voix inclus, Accord à double bande passante et plus encore.

[1] Note: Les poignés montrées sur la photo ne sont pas incluses dans l'expédition! Inclus dans l'expédition se trouvent: le microphone à main HM-36, le cable d'alimentation, les fusibles de rechange et la notice d'utilisation en allemand et anglais.

Accessoires IC-7200

MB-116

CT-17 Front

CT-17 Rear

IC-718

Accessoires IC-718

SM-20

FL-52A

CT-17 Front

CT-17 Rear

TuneRite Aide au Tuning

Aide au tuning pour Icom IC-7800, 756/Pro/I/II/III, 7400, 718 et beaucoup d'autres. Details voir ici.

Inrad Roofing Filter pour IC-765/775

Les 'roofing filtres' par Inrad sont maintenant aussi disponible pour les postes Icom IC-765 et IC-775DSP.

Accessoires Icom

MB-23