RigRunner distributore alimentazione

Low-cost power distribution with PowerPole connectors Nuovo

8 connectors: 1 input, 7 outputs, each connector individually fused. Metal housing.

  • Included in delivery:
  • Set of 8 connectors (8red/8black)
  • Spare fuses with removal tool
  • Adhesive Velcro for mounting
Dati tecnici
Tensione di funzionamento 36V max.
Fuse protection Ingresso 40A
Uscita 3x 25A, 2x15A, 1x10A, 1x5A
Dimensioni 188 x 50 x 30mm
Peso 175g
Ordine No.
PP-8SPLIT Low-cost Stromverteiler 79.00 € Ordina Nuovo In magazzino, spedizione in 1 o 2 giorni.
Info sui costi di spedizione

RigRunner DC distribution


RigRunner series 4005, 4008 and 4012

Un RIGrunner e' il modo piu' conveniente e sicuro per connettere tutti i tuoi apparati all'alimentazione 12V DC. E' un alimentatore a 13.8 VDC che usa degli ottimi connettori Anderson Powerpole. Standardizza tutte le tue connessioni a 12 VDC usando il sistema Powerpole ARES & RACES, RSGB, ARRL

  • Tutti i modelli soo opportunamente tarati a 40 amps totali !
  • Connettori Anderson Powerpole , i migliori conettori per DC !
  • La nostra configurazione e' conforme agli standard ARES, RACES, RSGB e alle raccomandazioni ARRL per connettori a 12VDC e alta corrente.
  • Powerpole connectors provide interoperability for emergency communications.
  • Sicurezza, HOT CONNECT, polarizzati, chiave di colore ,sistema a connettori genderless.
  • No messy binding posts, frayed wire connections, black tape or short circuits!
  • Alta corrente! Piu' che sufficiente per i 12 V della tua stazione! Prendi il modello piu' opportuno.
  • Ogni modello puo' essere usato alla sua massima capacita': transceivers, amplificatori o qualunque accessorio.
  • Power monitor ,rende facile qualunque problema di tensione.
  • I LED indicatori di sovra e bassa tensione evidenziano istantaneamente qulunque problema ,senza alcun bisogno di interpretazione.
  • Si puo' configurare un audio alert per evidenziare problemi di sovratensione o sottotensione, entrambi, o puo' essere disabilitato.
  • Ogni modello e' dotato di fusibili tipo automotive ATC/ATO. Spedito con gli appositi fusibili in dotazione.
  • Include cavi di alimentazione di opportuna dimensione , power poles gia' installati da un lato , aperti dall'altro lato del cavo
  • I modelli unswitched possono usare qualunque jack di uscita come la tensione di ingresso a range completo.
  • I fusibili da auto ATC/ATO sono facili da trovarsi e sono dispoibili in 10 tipi da 1 a 40 amps.
  • I fusibili si cambiano facilmente;sono facilmente accessibili in portafusibili di alta qualita'.
  • Ogni fusibile ha un illuminatore led per evidenziare istantaneamente problemi di corto circuito!
  • Soppressione di RF su ogni uscita.
  • Qualita' di costruzione come il nostro RIGblasters. No plastiche.
  • Un set completo di quick Powerpole ,disponibili cavi di adattamento e prolunghe.
  • Montaggio con protezione 3M Bumpon®.


Tavola di paragone RigRunner
Modello 4005C 4005H 4005LAN 4007U 4008C 4008H 4010S+ 4012C
No. di connessioni 5 5 5 7 8 8 10 12
Max. carico 40A 40A 40A 40A 40A 40A 40A 40A
Allarme inferiore / sovra tensione - - - Si Si - Si Si
Funzione di commutazione - - Si Si - - Si -
Indicatore Corrente/Tensione - - Si, sito web Si, 7 Segment - - - -
USB boccola caricamento - - - 1 - - - -
Cavo di alimentazione 180cm comprese della fornitura Si Si Si No Si Si Si Si
No. di connettori comprese della fornitura (rosso/nero) 5/5 5/5 - - 8/8 8/8 10/10 12/12
Dimensione 35 x 152 x 76 mm 35 x 178 x 76 mm 38 x 203 x 127 mm 22 x 246 x 81 mm 35 x 228 x 76 mm 35 x 247 x 76 mm 35 x 298 x 71 mm 35 x 298 x 76 mm
Peso 192 g 192 g 840 g 365 g 219 g 319 g 433 g 433 g
Ordine No. RR-4005C RR-4005H RR-4005LAN RR-4007U RR-4008C RR-4008H RR-4010S+ RR-4012C
Ordine No.
RR-4005C RigRunner 4005C 104.00 € Ordina In magazzino, spedizione in 1 o 2 giorni.
RR-4005H RigRunner 4005H, orizzontale 104.00 € Ordina In magazzino, spedizione in 1 o 2 giorni.
RR-4005LAN RigRunner 4005LAN, Ethernet 339.00 € Ordina In magazzino, spedizione in 1 o 2 giorni.
RR-4007U RigRunner 4007U 235.00 € Ordina In magazzino, spedizione in 1 o 2 giorni.
RR-4008C RigRunner 4008C 144.00 € Ordina In magazzino, spedizione in 1 o 2 giorni.
RR-4008H RigRunner 4008H, orizzontale 132.00 € Ordina In magazzino, spedizione in 1 o 2 giorni.
RR-4010SPLUS RigRunner 4010SC 239.00 € Ordina In magazzino, spedizione in 1 o 2 giorni.
RR-4012C RigRunner 4012C 161.00 € Ordina In magazzino, spedizione in 1 o 2 giorni.
Info sui costi di spedizione

RigRunner 4005C / 4005H - Power Distribution Strip

RR-4005C/H

The RR-4005C provides 5 connectors for various consumers. Each connector is individually fused with automotive ATC/ATO fuses, a blown fuse is indicated by a LED. The RR-4005H is the same distribution as the RR-4005C, but for wall mounting. The power pole connectors are arranged in this device on the underside. So bent and pulled out cables have finally ended.

  • Included in delivery:
  • RR-4005C or RR-4005H distribution strip
  • 1,8m cable with 45A PowerPole connectors
  • PowerPole connectors 30A (5red/5black)
Ordine No.
RR-4005C RigRunner 4005C power distribution strip 104.00 € Ordina In magazzino, spedizione in 1 o 2 giorni.
RR-4005H RigRunner 4005H power distribution strip, horizontal 104.00 € Ordina In magazzino, spedizione in 1 o 2 giorni.
Info sui costi di spedizione

RigRunner 4005LAN: Intelligent "Distribution Strip" with Ethernet!

RR-4005LAN

The RR-4005LAN is a power distribution strip with Internet connectivity! The special feature of this device is an Ethernet connection, which allows to integrate the RR-4005LAN easily into your local or remote network.

Every operator of a remote site knows this problem - which devie is requiring how much power? How can I easily switch of a transmitter without driving a long distance up on the mountain? Not only for repeater operators the RR-4005LAN is an excellent extension of the equipment, but also for everyone who runs a remote controlled station, a weather monitoring post, remote data acquisition system and much more.

The RR-4005LAN offers five individually switchable DC connections for devices. The distributor uses the well known PowerPole Connectors which are becoming more and more widely used, not only in amateur radio but also in RC models, data acquisition etc.

Each DC outlet can be fused individually. An electronic fuse can be set between 0.1 and max. 40A. The total current for all consumers must not exceed 40A.

The integrated web server allows turning on and off of each individual device, the display of actual current, the display of input voltage etc. To facilitate in automation of some tasks this data is also available in XML format.

At the location the RR-4005LAN shows the current consumption on a LC display. This display shows the actual input voltage and current of one consumer at a time. All settings are done either at the device itself or via the integrated web server. Integration into the local network is very easy, the IP adress is either configured manually or via DHCP.

Also directly at the device each consumer can be switched on and off individually. It is important to note that the individual state (on/off) is retained even after a power failure. When power comes back only the enabled outlets are turned on.

An extension socket on the RR-4005LAN is for future extensions, like cascading several distribution strips, acquisition of analog data or serial data communications.

  • Included in shipment is:
  • RR-4005i DC distributor with Ethernet
  • 1m Ethernet Cable
  • Documentation (English)
Ordine No.
RR-4005LAN RigRunner 4005LAN DC Distributor with Ethernet 339.00 € Ordina In magazzino, spedizione in 1 o 2 giorni.
Info sui costi di spedizione

RigRunner 4007U Power Distribution with Switching Capability, USB

RR-4007U RigRunner 4007U

The distribution strip RR-4007U differs from other models by these noteable features:

  • a central on/off switch to power all connected,
  • a display of voltage or current with a 7 segment display and
  • a USB socket for charging Apple or Android phones or other USB powered devices.

As other RigRunner power distribution strips the RR-4007U has an automatic over and under voltage protection, individually fused line for each load with error LED, HF chokes on all lines to prevent interferences and much more.

The central switching capability is very useful when you want to turn off all loads, but keep the main power supply running. For example when you want to continue to charge a battery. The display of voltage or current comes in helpful, when you need to check the power supply without using further means of measurement. The displayed current is the the total current of all loads. The built-in USB socket is very advantageous with the ubiquitous USB device like phones or batteries. It is designed to the USB specs and limits the charging current depending on device types like Apple or Android.

  • Included in shipment is:
  • RigRunner power distribution strip
  • Rubber feet, self adhesive
  • Engl. owners manual
Ordine No.
RR-4007U RigRunner 4007U Power Distribution Strip with Switch, USB 235.00 € Ordina In magazzino, spedizione in 1 o 2 giorni.
Info sui costi di spedizione

RigRunner 4008C / 4008H - Power Distribution Strip

RR-4008C/H

The RR-4005C provides 8 connectors for various consumers. Each connector is individually fused with automotive ATC/ATO fuses, a blown fuse is indicated by a LED. The RR-4008H is the same distribution as the RR-4008C, but for wall mounting. The power pole connectors are arranged in this device on the bottom side, which is much more convenient for this installation type. In contrast to the "C" variant the 4008H does not provide a under/over voltage warning.

  • Included in delivery:
  • RR-4008C or RR-4008H distribution strip
  • 1,8m cable with 45A PowerPole connectors
  • PowerPole connectors 30A (5red/5black)
Ordine No.
RR-4008C RigRunner 4008C power distribution strip 144.00 € Ordina In magazzino, spedizione in 1 o 2 giorni.
RR-4008H RigRunner 4008H power distribution strip, horizontal 132.00 € Ordina In magazzino, spedizione in 1 o 2 giorni.
Info sui costi di spedizione

RigRunner 4010SPLUS Power Distribution Strip with Switching Capability

FRigRunner RR-4010S-Plus RR-4010S-Plus

The power distribution RR-4010SPLUS is the successor to the RR-4020SC and provides connectors for 10 consumers. In case of over or under voltage a visual and audio alert is triggered. The special feature of the RR-4010SPLUS strip is its switching capability. Once a load is applied to consumer 1, the other consumers 2 to 10 are automatically switched on. For example, by switching on a main consumer such as a radio all other accessories of the station are also switched on. For switching a PowerFET with 90A load capacity with temperature and overcurrent protection. This automatic function can be turned off so that the dependent consumers are always on or always off.

In addition, the power distributor RR-4010SPLUS has many parameters to adjust. Via USB and with the help of a simple terminal program you can adjust the threshold values for over/under voltage alarm, or operation limit for the switching function on the main consumer. Another parameter controls the switch-off delay, adjust the time after which the dependent consumers, when switching off the main consumer, are also switched off. The consumers can be switched off and on via USB command, too. An internal jumper helps to turn off all LEDs for minimum power consumption. These are all useful functions for remote-controlled relay stations with emergency power supply or control functions on board a vehicle.

  • Included in delivery:
  • RR-4010SPLUS distribution strip
  • 1,8m cable with 45A PowerPole connectors
  • PowerPole connectors 30A (10red/10black)
  • Engl. owner manual

A micro USB cable, necessary for programming special functions, is not included in delivery!

Ordine No.
RR-4010SPLUS RigRunner 4010SPLUS distribution strip 239.00 € Ordina In magazzino, spedizione in 1 o 2 giorni.
40074.06 USB cable A/micro-B, 60cm 3.90 € Ordina In magazzino, spedizione in 1 o 2 giorni.
40074.1 USB cable A/micro-B, 100cm 4.50 € Ordina In magazzino, spedizione in 1 o 2 giorni.
Info sui costi di spedizione

RigRunner 4012C Distribution Strip

RR-4012C

The RR-4012C provides 12 connectors for various consumers. Each connector is individually fused with automotive ATC/ATO fuses, a blown fuse is indicated by a LED. Like other RigRunner distribution strips the RR-4012C automatically switches off in case of over or under voltage with a visual and audio alert. HF chokes on all lines to prevent interferences.

  • Included in delivery:
  • RR-4012C distribution strip
  • 1,8m cable with 45A PowerPole connectors
  • PowerPole connectors 30A (12red/12black)
Ordine No.
RR-4012C RigRunner 4012C distribution strip 161.00 € Ordina In magazzino, spedizione in 1 o 2 giorni.
Info sui costi di spedizione