WLAN antennas 2.4GHz
Omni directional indoor antennas

Antennas with omni directional pattern for indoor use.
Usage: To supply indoor areas like offices, halls etc. with wireless LAN. Depending on model, the antennas are mounted to the wall or ceiling, or can be placed in a bookshelf or similiar.

Equipment antennas

	Dualband Antenna with knuckle	Dualband Antenna with knuckle	Antenna with knuckle	Antenna with knuckle	Antenna with knuckle	Antenna with knuckle	Antenna with straight connectors	Antenna with 90° angled connector	Antenna with 90° angled connector	Antenna with 25cm cable and Velcro™ fixation
Type	17400	17401	17015.9xxx	17015.7xxx	17013.xxx	17012.xxx	17010.10xxx	17010.11xxx	17010.11N	17010.12
Frequency range	2400 - 2485 5200-5900	2400 - 2485 5200-5900	2350 - 2500	2350 - 2500	2350 - 2500	2350 - 2500	2350 - 2500	2350 - 2500	2350 - 2500	2350 - 2500	MHz
Electrical model	Stacked halfwave dipoles	Halfwave dipoles	Multiple Stacked halfwave dipole	Multiple Stacked halfwave dipole	Stacked halfwave dipole	Halfwave dipole	Halfwave dipole	Halfwave dipole	Halfwave dipole	Halfwave dipole
Impedance	50	50	50	50	50	50	50	50	50	50	Ω
SWR	2.0	2.0	2.0	2.0	2.0	2.0	2.0	2.0	2.0	2.0
Gain	3/5	2/2	9.0	7.0	5.0	3	2.1	2.1	2.1	2.1	dBi
Cover	Polyurethane, black
Connector	RP-SMA	RP-SMA	RP-SMA or RP-TNC or N	RP-SMA or RP-TNC or N	SMA or RP-SMA or RP-TNC	RP-SMA or RP-TNC	SMA or RP-SMA	SMA or RP-SMA	N	SMA
Length	220	145	400	300	200	140	95	77	93	85	mm
Cable length	-	-	-	-	-	-	-	-	-	250	mm
Order No. Connector SMA	-	-	-	-	17013 15.66 (15.20) EUR	-	17010.10 8.96 ( 8.70) EUR	17010.11 11.12 (10.80) EUR	-	17010.12 18.54 (18.00) EUR
Order No. Connector RP-SMA	17400 20.60 (20.00) EUR	17401 12.36 (12.00) EUR	17015.9RSMA 25.34 (24.60) EUR	17015.7RSMA 23.38 (22.70) EUR	17013.RSMA 15.66 (15.20) EUR	17012.RSMA 13.18 (12.80) EUR	17010.10REV 12.15 (11.80) EUR	17010.11REV 12.67 (12.30) EUR	-	-
Order No. Connector RP-TNC	-	-	17015.9RTNC 26.27 (25.50) EUR	17015.7RTNC 24.21 (23.50) EUR	17013.RTNC 16.69 (16.20) EUR	17012.RTNC 15.35 (14.90) EUR	-	-	-	-
Order No. Connector N	-	-	17015.9N 32.96 (32.00) EUR	17015.7N 28.84 (28.00) EUR	17013.N 22.66 (22.00) EUR	-	-	-	17010.11N 14.83 (14.40) EUR	-

RP-SMA aka R-SMA or Reverse-SMA. Fits without adaptor to PCI boards, many devices by Netgear, D-Link etc. In case of dount please ask us.

RP-TNC aka R-TNC or Reverse-TNC. Fits without adaptor to many devices by Linksys, Cisco etc. In case of doubt please ask us.

SMA if used with WIFi equipment require adaptor 42880 to RP-SMA in most cases.

Looking for a magnet base for these antennas? Please click here: Mini magnet base for SMA antennas.

Splash proof 2.4GHz Antennas, IP54

17014.IPEX

17014.RSMA

Splash proof 2.4GHz Antennas, IP54

Model 17014.IPEX with 6mm thread bolt and 13cm log cable with IPEX (U.FL®) connector. The seal between antenna and housing must be provided by the customer. Length 114mm, gain 1dBi. Comes complete with nut and lock washer.

Model 17014.RSMA with Reverse SMA connector. Seal between RP-SMA connector an antenna body is achieved with a special gasket integrated into the antenna. The seal between RPSMA connector and RPSMA socket must be provided by the customer. Length 150mm, gain 3dBi.

Suitable for antenna 17014.RSMA: IPEX (U.FL) Adaptor cable with RP-SMA jack flange mount with gasket, length 10cm.

40350.SFR-X 14.63 (14.20) EUR

Magnet base antenna

Gain 5dBi, stacked radiator, black, length 12cm. Includes high quality Teflon cable RG-316, 150cm long, Connector is Lucent (aka MC Card), fits on many PCMCIA cards (Orinoco, Proxim etc.), or RP-SMA or RP-TNC connector, fits on most PCI cards and many routers. Very solid antenna, suitable for travels, weatherproof for use on a car (war driving).

Magnet base RP-SMA

MIMO Antenna stand

20128 Antenna stand

When your WiFi router is installed below the desk the transmission of radio frequencies is greatly hindered... get your antennas out of the hole and on your desk or on the wall and extend the range of the WiFi LAN. Includes 1.5m long cables, connector RP-SMA /plug/jack.
You can use the antennas supplied with your router or use our high gain antennas like the article 17015.9RSMA (see above). Available with two or three antenna sockets.

20128.x also suitable for wall mounting

Universal suction cup holder

23136 (Antenna not included)

For light antennas. The 6mm holes can take an SMA/RP-SMA flange mount socket or a pigtail with such a connector. Made from steel (powder coated), so it is also useable for small magnet mount antennas.

NB-2400 Notebook antenna 2.4GHz

NB-2400

Antenna to retro-fit suitable notebook PCs. Many up-to-date notebooks are prepared for WiFi/wireless LAN. Usually this requires a mini-PCI module, which allows connection of two antennas with U.FL connector. Suitable for any 802.11B or 802.11g system.
The antennas are usually installed in the display lid, many recent computers are prepared for such an installation.
The cable is 60cm long, sufficient for most notebook sizes. Gain approx. 2dBi, nearly omni-directional radiation.

The size of the antenna element itself is 40 x 10 and has three holes for mounting.

Please note that WiMo cannot perform this installation. You install this antenna at your own risk.

LPA-Multi Glass mount antenna

Small and unobtrusive 2.4GHz patch antenna to be mounted on glass, plastic, wood etc. (cupboard, cubicle wall etc.), also suitable for car use. Approx. 12cm long, 2cm wide. Ideal for the PC with the antenna below the desk and without connection to the local WLAN. Or stick it to the window to extend coverage to the garden or terrace. Includes 250cm cable with various connectors.

Omni directional antennas with N connector (male)

Use indoors or outdoors, either mount to wall with optional bracket (see below), or mount on top of equipment rack. For vehicle use (antennas are weatherproof) suitable N base mounts are available. MG-200 with spring at the base, very solid, the VC-2400-xxx series are without spring.

	VC-2400	VC-2400-7	VC-2400-9	MG-200
Gain	4,5 dBi	7 dBi	9 dBi	7 dBi
Weight	110 g	180 g	250 g	300 g
Length	26 cm	45 cm	61 cm	60 cm
Color	Black	White	White	Black
Order No.	18610 66.95 (65.00) EUR	18617.07 72.92 (70.80) EUR	18617.09 94.04 (91.30) EUR	13018 79.31 (77.00) EUR

Magnet base for VC-2400 antennas

20125

Black base, approx. 75mm diameter, with 2m low-loss coaxial cable, with N female and RP-SMA connector. The base has an integrated magnet which eases the installation for example on an equipment rack, but which is not suitable for mobile use on a car.

Mounting bracket

For wall mount of antennas like MG-200, VC-2400 (18615.N) or all other antennas with SMA or TNC connector (18615.SMA, 18615.TNC).
18615.N
Versatile use: the 16mm hole takes any N connector, cable sets or pigtails with N panel jacks, the antenna is then mounted on top of this N jack. Use cable harness Order No. 20052, Pigtail with N jack Order No. 40300.N-F, or N panel mount Order No. 42055. Material aluminum, includes screws etc.
18615.SMA
Universal bracket for smaller antennas with SMA (or Reverse-SMA) connector. Install any suitable SMA jack (panel mount), various pigtails etc. into the bracket, the antenna is the mounted on top of the jack. Material aluminum, includes all screws etc.
18615.TNC
As above, but with 13mm hole for TNC or RP-TNC flange mount jacks.

Large mounting bracket (shown with N pigtail, not included)

Small mounting bracket (shown with SMA pigtail, not included)

Desk antenna

Desk antenna including radiator and 180cm cable, 4dBi gain, connector SMA. Very high quality and professional finish, no comparion for the usually supplied antennas. Does not require a counterpoise so the antenna can be mounted on non-conducting surfaces. ANtenna base with self adhesive strip.

Note: This antenna comes with a 'normal' SMA connector, to use it with most WiFi equipment with Reverse-SMA connector an adaptor Order No. 42880 is required.

Desktop antenna CA-2400

Antenna includes radiator, base and 1m cable. Various connectors available, see below. Suitable without adaptor for almost all PCI boards, many Netgear devices, nearly all D-Link devices (RP-SMA) or Cisco and Linksys products (RP-TNC), some PCMCIA cards (Lucent or MMCX). Solid base for desktop use, with the same base also suitable for wall mounting. Omni directional radiator with 6dBi gain, ideal antenna to extend the range in a office or home environment.

HO-2400 Omni-directional radiator for ceiling mount

With the antenna mounted on the ceiling environmental influences are reduced to a minimum, making this antenna ideal for illumination of larger rooms and hallways (hotels, lobbies, offices etc.). Vertically polarized with vertical HPBW angle of 40°, Gain 2dBi. Connector N jack (female), white case. Very unobtrusive, looks similiar to a smoke detector. Diameter 115mm, height 42mm, max. ceiling thickness 20mm. Flexible mounting options with the included base plate.