Yaesu FT-DX5000MP + SM-5000
Aside from the FT-DX9000 the FT-DX5000 is the flag ship of Yaesu shortwave transceivers. An excellent main receiver, working as a double superhet with 9MHz 1. IF is complemented with an independant second receiver (triple superhet, 40MHz 1.IF). This concept is perfect for the demanding DX chaser or contester, whether at home or in a DX location. The main receiver achieves top values, for example a non-blocking dynamic range of up to 112 dB, with a 3rd order IP of 40dB. These superb values are also independently verified by Sherwood Engineering Inc. (USA), who list the FT-DX5000 at the top position in their receiver list.
Yaesu arrives at such excellent receiver values by using numerous roofing filters. The FT-DX5000 includes the following roofing filters: 600Hz, 3, 6 and 15kHz. The model FT-Dx5000MP has a further 300Hz filter installed, which can be retrofitted to other models as well.
The FT-DX5000 is supplied with a built-in 230V AC power supply, operation with 13.8V is not possible. The power supply has enough 'juice' for the MOSFET finals, which run on 48V with a very good linearity. The max. output power of all FT-DX5000 models is 200W (75W in class A operation).
FT-DX5000
Last but not least both receivers are supported by a state of the art IF DSP. This system allows to set nearly any IF bandwidth for any mode. Audio peak filters raise and limit the audio, perfect for much better intelligibility, variable automatic or manual notch filters suppress interferences. Further the IF DSP is used for noise reduction, a perfect transmit modulation and much more.
The FT-DX5000 is offered by Yaesu in three model variants. The missing components from one to next model can be retrofitted:
SM-5000
The Station Monitor SM-5000 is included with the top models FT-DX5000MP and FT-DX5000D, the other model can use the SM-5000 as well, as an option. This monitor offers a graphical spectrum view of the currently selected band. This is very helpful for a quick overview of activity on a band, perfect for contesting and breaking that pile-up. Additionally the SM-5000 offers two built-in loudspeakers, one for each receiver.
| Articulo No. | |||||
|---|---|---|---|---|---|
| FT-DX5000 | Model without SM-5000, without 300Hz Roofing filter | 5380.00 € | Comprar | ||
| FT-DX5000D | Model with SM-5000, without 300Hz Roofing filter | 5429.00 € | Comprar | ||
| FT-DX5000MP | Model with SM-5000, with 300Hz Roofing filter | 5749.00 € | Comprar |
| Articulo No. | |||||
|---|---|---|---|---|---|
| XF-126CN | 300Hz Roofing Filter | 183.00 € | Comprar | ||
| SM-5000 | Station Monitor SM-5000 | 399.00 € | Comprar | ||
| MD-100(A8X) | Desktop Microphone | 145.00 € | Comprar | ||
| MD-200 | Luxury Desktop Microphon | 276.00 € | Comprar | ||
| DMU-2000 | Data Management Unit | 1672.00 € | Comprar | ||
| MTU-160 | Micro Tune Unit 160m | 696.00 € | Comprar | ||
| MTU-8040 | Micro Tune Unit 80m/40m | 701.00 € | Comprar | ||
| MTU-3020 | Micro Tune Unit 30m/20m | 723.00 € | Comprar | ||
| FH-2 | Keypad for Voice/CW-Keyer | 40.50 € | Comprar | ||
| SP-2000Y | Desktop Loudspeaker | 193.00 € | Comprar |
µ-Tune Kits are external filters for the bands 160m, 80 + 40m and 30 + 20m. These filters work with a motor driven coil and achieve a very high Q, again increasing the strong signal handling capabilities of the transceiver. The bandfilters require some assembly before use. All required cables are included. Size 330 x 120 x 120mm, weight 2.6kg.
| Articulo No. | |||||
|---|---|---|---|---|---|
| MTU-160 | µ-Tune Kit 160m | 696.00 € | Comprar | ||
| MTU-8040 | µ-Tune Kit 80/40m | 701.00 € | Comprar | ||
| MTU-3020 | µ-Tune Kit 30/20m | 723.00 € | Comprar |
The DMU-2000 is an optional device for the FT-DX5000, FT-2000 and FT-950 and offers some very useful functions. For operation of the DMU-2000 a SVGA monitor is required (not included). Furthermore some functions require a computer keyboard (not included).
Note: Before starting to use the DMU-2000 the supplied scope unit must be installed in the FT-DX5000 transceiver. If required we can install that board for you.
| Articulo No. | |||||
|---|---|---|---|---|---|
| DMU-2000 | Data Management Unit | 1672.00 € | Comprar |
| General | |
|---|---|
| RX Frequency Range | 30 kHz - 60 MHz (operating) |
| 1.8- 29.7 MHz, 50 - 54 MHz (specified performance, Amateur bands only) | |
| TX Frequency Ranges | 1.8 - 29.7 MHz, 50 - 54 MHz (Amateur bands only) |
| Frequency Stability | ±0.05 ppm (MP version, after 1 minute @ -10 °C ~ +60 °C) |
| ±0.5 ppm (after 1 minute @ -10 °C ~ +60 °C) | |
| Operationg Temperature Range | -10 °C ~ +60 °C |
| Emission Modes | A1A (CW), A3E (AM), J3E (LSB, USB), F3E (FM), |
| F1B (RTTY), F1D (PACKET), F2D (PACKET) | |
| Frequency Steps | 1/5/10 Hz (SSB,CW, & AM), 100 Hz (FM) |
| 50 Ω, unbalanced | |
| 16.7 - 150 Ω, unbalanced (Tuner ON, 1.8 - 29.7 MHz Amateur bands) | |
| 25 - 100 Ω, unbalanced (Tuner ON, 50 MHz Amateuer band) | |
| Power Consumption | Rx (no signal) 70 VA |
| Rx (signal present) 80 VA | |
| Tx (200 W) 720 VA | |
| Supply Voltage | AC 90 V - AC 264 V |
| Dimensions (WxHxD) | 462 x 135 x 389 mm w/o knob and connector |
| Weight (approx.) | 21 kg |
| Transmitter | |
|---|---|
| Power Output | 10 - 200 Watt (CW, LSB, USB, FM, RTTY, PKT) |
| 5 - 50 Watt (AM carrier) | |
| 10 - 75 Watt (Class A: LSB, USB) | |
| Modulation Types | J3E (SSB): Balanced |
| A3E (AM): Low-Level (Early Stage) | |
| F3E (FM): Variable Reactance | |
| Maximum FM Deviation | ±5.0 kHz / ±2.5 kHz |
| Harmonic Radiation | Better than -60dB (1.8 - 50 MHz Amateuer bands) |
| SSB Carrier Suppression | At least 60 dB below peak output |
| Undesired Sideband Suppression | At least 60 dB below peak output |
| Audio Response (SSB) | Not more than -6 dB from 300 to 2700 Hz |
| 3rd-order IMD | -31 dB @14 MHz, 200 watts PEP |
| -40 dB @14 MHz, Class A: 75 watts PEP | |
| Bandwidth | 500 Hz (CW) |
| 3.0 kHz (LSB, USB) | |
| 6.0 kHz (AM) | |
| 16 kHz (FM) | |
| Microphone Impedance | 600 Ω (200 to 10 k Ω |
| Receiver | |||
|---|---|---|---|
| Circuit Type | VFO-A; Double-conversion superheterodyne | ||
| VFO-B; Triple-conversion superheterodyne | |||
| Intermediate Frequencies | VFO-A; 9 MHz/30 kHz (24 kHz for AM/FM) | ||
| VFO-B; 40.455 MHz/455 kHz/30 kHz (24 kHz for AM/FM) | |||
| Sensitivity | SSB (2.4 kHz, 10 dB S+N/N) | ||
| 2 μV (0.5 - 1.8 MHz, IPO1) | |||
| 0.2 μV (1.8 - 30 MHz, AMP2)* | |||
| 0.125 μV (50 - 54 MHz, AMP2) | |||
| AM (6 kHz, 10 dB S+N/N, 30 % modulation @400 Hz) | |||
| 6 μV (0.5 - 1.8 MHz, IPO1) | |||
| 2 μV (1.8 - 30 MHz, AMP2)* | |||
| 1 μV (50 - 54 MHz, AMP2) | |||
| FM (BW: 15 kHz, 12 dB SINAD) | |||
| 0.5 μV (28 - 30 MHz, AMP2) | |||
| 0.35 μV (50 - 54 MHz; AMP2) | |||
| There is no specification in frequency ranges not listed. | |||
| Squelch Sensitivity (AMP2) | SSB/CW/AM | ||
| 2 μV (0.1 - 30 MHz) | |||
| 2 μV (50 - 54 MHz) | |||
| FM | |||
| 1 μ (28 - 30 MHz) | |||
| 1 μV (50 - 54 MHz) | |||
| There is no specification in frequency ranges not listed. | |||
| Selectivity (-6/-60 dB) | Mode | -6 dB | -60 dB |
| CW | 0.5 kHz or better | 750 Hz or less | |
| LSB/ USB | 2.4 kHz or better | 3.6 kHz or less | |
| AM | 6 kHz or better | 15 kHz or less | |
| FM | 12 kHz or better | 30 kHz or less | |
| Image Rejection | 70 dB or better (1.8 - 29.7 MHz Amateuer bands, VRF: ON) | ||
| 60 dB or better (50 MHz Amateuer band) | |||
| Maximum Audio Output | 2.5 W into 4 Ω with 10% THD | ||
| Audio Output Impedance | 4 to 8 Ω (4 Ω nominal) | ||
| Conducted Radiation | Less than 4000 μμW | ||
Specifications are subject to change, in the interest of technical improvement, without notice or obligation, and are guaranteed only within the amateuer bands.
| Diese Seite drucken | Diese Seite zu den Favoriten hinzufügen |